Options & accessories for the TOX®-ElectricPowerDrive
Essential safety accessory: All TOX®-ElectricDrives (except type EXe-F) can be equipped with a safety brake.The safety brake stops the drive in case of a malfunction. Important especially for heavy tools.
Motor holding brake
In case of a currentless stop of the system, a safety rod catcher prevents the working piston from dropping. This protects the drive, tools and piece parts in the machine against damage. The motor holding brake is optionally available for the drives EQe and EXe.
The servo drives type EXe can be equipped with a fan on request. It cools down the motor to enable higher power density and thus lower cycle times.
Lubrication Unit EZ-K
The lubrication unit feeds the drive with the right amount of grease. It is optionally available for the drives EQe and EXe.
Force sensor / piezo sensor
If required, an external force sensor can be integrated.
Travel measuring system
An external travel sensor determines the absolute position of a workpiece. It is independent of the system bending up.
Options & accessories for the drive system
TOX® UDI Panel
Ideal extension for your servo press system. The TOX® UDI Panel is available as 13.3" or 21" as well as 10.1" handheld version for installing the TOX® Software.
- Powerful PC hardware (no other hardware required)
- Sturdy industrial design with IP54
- Can be used upright as well as horizontally
- VESA bores (except for 10.0" handheld)
Grease press ZFP
A must have for a long life: The manual grease press ZFP.
Special grease ZFE
Especially developed for TOX®-ElectricDrives: Special grease ZFE in a 400 g cartridge.
Calibration equipment ZKE
For the re-calibration of the TOX®-ElectricDrives. Includes: Precision force sensor, connection cable, digital display unit (handheld), power supply, factory calibration report, manual, software and transport case.
Frames of various sizes designed for different maximum press forces. Available as C-frame (e.g. CMB, PC) or as 4-column frame.